You are not logged in.
Menu
Your Cart

Matrix VISIONPRO308 Digital PBX with 3 Trunks and 8 Analog Extensions Intercom

Matrix VISIONPRO308 Digital PBX with 3 Trunks and 8 Analog Extensions Intercom
Matrix VISIONPRO308 Digital PBX with 3 Trunks and 8 Analog Extensions Intercom
  • Product ID: P7174
  • Product CD: PFQZO
  • Model: VISIONPRO308
  • Warranty: 1 Years from MATRIX Service Center
  • Product URL: View Product
₹9,478
Ex Tax: ₹9,477
CD Discount: ₹1
  • DATASHEET :
Parameters Specifications
Type of Switching PCM/TDM, Digital Switching, 100% Non-blocking
Processor 16-bit DSP
Signaling Loop Start
Dialing DTMF and Pulse (10/20PPS)
Off-Hook AC Impedance 600/900/Complex
Off-Hook Current 39mA Max.
Loop Limit 1800Ω Max (Excluding Telephone)
On-Hook Voltage (Tip/Ring) -48V nominal
DTMF Detection ITU-T Q.24
Return Loss >18dB
Longitudinal Balance >50dB
Transmission Level Adjust Tx Gain: -12dB to +6dB, Rx Gain: -12dB to +6dB
Ringing Trapezoidal 50VRMS/25Hz and Sinusoidal 52VRMS/25Hz
REN 3
CLI Presentation DTMF, FSK ITU-T V.23 and FSK Bellcore 202
Protection Over Voltage Secondary Protection
Physical Connector 2.54mm Push Type connector
CO (Central Office)/Two-Wire Trunk (TWT) Signaling Loop Start
Loop Limit 1200Ω
Off-Hook AC Impedance 600/900/Complex
Pulse Dialling 10/20 PPS
DTMF Dialling and Reception ITU-T Q.23 and Q.24
Return Loss >18dB
Longitudinal Balance >50dB
Transmission Level Adjust Tx Gain: -15dB to +10dB, Rx Gain: -15dB to +10dB
CLI Reception DTMF, FSK ITU-T V.23 and FSK Bellcore 202
Call Maturity Delay and Polarity Reversal
Protection Over Voltage and Over Current Secondary Protection
Physical Connector 2.54mm Push Type connector
Input External Adapter 12V@2A for VISIONPRO 206, 308, 412
Dimensions (WxHxD) 23.1×16.25×5.5cm (10.5″x11.2″x3.1″)
Unit Weight 0.65 kg (1.43lbs)
Shipping Weight 3.5 kg (7.7lbs)
Installation Wall Mount
Operating Temperature 0°C to 45°C (+32°F to +122°F)
Operating Humidity 95% RH, Non-Condensing

Write a review

Note: HTML is not translated!
Bad Good